超微粉碎如何实现均一的粒径分布
小型实验研究用纳米干式粉碎机 超微粉碎机
NANO GETTER Laboratory Series
DMS65
● For developing new materials
● Dispersion of nano-size particles
● Ideal for making small quantity samples
More about NANO GETTER
Specifications
| Model | DMS65 |
| Motor | 2.2kW |
| Grinding Chamber Volume | 0.13L |
| Batch Quantity | 0.2L～0.5L |
| Bead Diameter | φ0.05mm～0.5mm |
LMZ Laboratory Series
MINICER
● Grinding and dispersion to the nano and submicron size
● The smallest size available in the standard mill LMZ series
● Micro beads can be used
● Evenly ground and dispersed particles achieved
More about LMZ
Specifications
| Model | MINICER |
| Motor | 0.94kW |
| Grinding Chamber Volume | 0.16L |
| Batch Quantity | 0.2L～0.5L |
| Bead Diameter | φ0.1mm～1.0mm |
LMZ Laboratory Series
LABSTAR
● Grinding and dispersion to the nano and submicron size
● Desktop laboratory type that is a size bigger than MINICER
More about LMZ
Specifications
| Model | LMZ06･LMZ075 |
| Motor | 3.7kW |
| Grinding Chamber Volume | 0.6L (LMZ), 0.75L (LME) |
| Batch Quantity | 2L ～ |
| Bead Diameter | φ0.1mm～1.0mm |
For foundational research
MINIZETA
● Possible to operate with minimum batch quantity among laboratory series
● Easy maintenance with simple structure
Specifications
| Model | MINIZETA |
| Motor | 0.75kW |
| Grinding Chamber Volume | 0.3L |
| Batch Quantity | 0.25L～0.5L |
| Bead Diameter | φ0.3mm～1.0mm |
工作原理：
研磨部分在设备的底部，进料通过研磨介质产生的强烈冲击和摩擦进行研磨。气流从底部侧面进入，经过研磨介质时可以冷却颗粒，同时颗粒也被气流从研磨区带到分级区。满足要求的细粉将会通过分级轮，剩下的大颗粒将会返回研磨区继续研磨。
应用：
PULVIS 特别适合于难于研磨的温敏材料。
在研磨过程中还可加入添加剂。
典型的应用如下：
- 电池材料 (阴极材料)
- 无机颜料
- 陶瓷材料
- 金属氧化物
- 工业矿物
- 玻璃，玻璃粉
- 金属氧化物（充电电池材料）
- 磁性材料（惰性气体保护）
- 石墨（锂电池阳极）
耐磨保护：
研磨部分和分级部分都可以使用陶瓷材料。
在线客服